An LG TV that keeps turning on and off does not always have a power supply fault. In most cases, the symptom can have very different causes: a faulty HDMI cable, a set-top box sending an erratic signal, or a failing power supply board. Before taking anything apart, first determine whether the TV is actually restarting or whether only the HDMI source’s picture is disappearing.
Actual restart or HDMI signal loss: the diagnosis that changes everything
This point is rarely discussed, yet it determines everything that follows in the troubleshooting process. When the screen goes black, try pressing the volume button on the remote. If the volume indicator appears, the TV is working; the source signal is cutting out.
In this case, the TV is not the problem. The issue is with the set-top box, HDMI device, cable, or port being used. Unplug the HDMI cable, try another port on the TV, then test with a second cable. If the picture returns and remains stable, you have your diagnosis.
However, if the standby LED turns off and then back on, or the LG logo reappears with each cycle, you are dealing with a complete TV restart. The causes and solutions are radically different. A detailed guide to this LG TV turning on and off repeatedly problem can help explain what is happening.

Comparison table of causes by symptom
Grouping causes by the symptoms you observe helps avoid unnecessary troubleshooting. Here is a summary of the most common situations.
| Observed symptom | Likely cause | First check |
|---|---|---|
| Black screen but volume indicator appears | HDMI cable, set-top box, HDMI port | Try a different cable and port |
| LG logo keeps reappearing | Power supply board, capacitors | Unplug the TV for several minutes |
| TV turns off on a specific channel | Weak or fluctuating antenna signal | Check the coaxial cable; contact your provider |
| TV turns off after an update | Incompatible or corrupted firmware | Check the model number on LG Support |
| TV turns off after a few minutes | Overheating or sleep timer enabled | Check ventilation and timer settings |
This table is not exhaustive, but it covers the vast majority of situations. Identifying the right symptom cuts diagnostic time in half.
LG self-diagnosis: run the picture test before doing anything else
LG TVs include a self-diagnosis tool that you can access from the Settings menu. The picture test displays a test pattern generated internally by the TV, without using an external source.
- If the fault (signal loss, black screen, or restart) also occurs during the picture test, the problem is inside the TV: the main board, power supply, or backlight.
- If the picture test runs without interruption, the problem is upstream: the incoming signal, an external device, or the cabling.
- If the TV restarts before you can even access the menu, the fault is probably related to the power supply or a critical component on the main board.
This method helps prevent replacing components based solely on the visible symptom. A stable picture test immediately rules out an internal hardware fault.
Checking the antenna or cable signal
A weak or unstable antenna signal can cause picture disruptions that look like a restart. LG recommends checking the condition of the coaxial cable and its connectors. If the problem occurs only on certain channels, contact your TV provider to check the signal quality.
Resetting and updating firmware on an LG TV
Once a restart loop has been confirmed and the picture test has revealed nothing, there are two software troubleshooting steps worth trying before considering a hardware repair.
First, unplug the TV from the power outlet for at least two minutes, then plug it back in. This drains residual charge from the capacitors and forces the power supply board to reset. Simply leaving the TV unplugged for a while resolves a significant number of restart loops.
The second step is to perform a factory reset, available from the Settings menu if the TV stays on long enough. Note: this will erase all personal settings (accounts, Wi-Fi, and installed apps).
Firmware updates: model-specific precautions
LG software updates are not available for every model. Before trying to update, check compatibility by looking up the exact model number (printed on the back of the TV) on the LG Support website. Installing incompatible firmware can make the problem worse rather than fix it.

Confirmed hardware fault: when to call a repair service
If the LG TV keeps restarting even during the picture test, and neither unplugging it nor resetting it makes a difference, the fault is hardware-related. The components most often responsible are swollen capacitors on the power supply board and, less commonly, a faulty LED backlight.
- Have the serial number and proof of purchase ready before contacting LG customer service: warranty terms vary by model and year of manufacture.
- Take a photo of the label on the back of the TV to speed up the service process.
- If the warranty has expired, an independent repair technician can replace the capacitors for far less than the cost of replacing the entire board.
Replacing capacitors on a power supply board is a common repair that can extend a TV’s lifespan by several years. Whether the HDMI source picture is cutting out or the TV is restarting completely remains the decisive factor in distinguishing a software fix from a hardware repair. A methodical diagnosis, starting with the picture test and cable checks, avoids unnecessary component replacements and points directly to the right solution.



